Administration
Discovery - LLDP
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 91
6
Discovery - LLDP
See Discover - LLDP.
Discovery - CDP
See Discovery - CDP.
Locate Device
This feature enables flashing all network port LEDs on a specific device in the network to
locate the device physically. This feature is useful for locating a device within a room with
many interconnected devices. When this feature is activated, all network port LEDs on the
device flash for a configured duration (one minute by default). In a stacked device, a specific
unit or all units in the stack can be specified.
STEP 1 Click Administration > Locate Device.
STEP 2 Enter values in the following fields:
• Duration—Enter for how long (in seconds) the port’s LEDs will flash.
• Remaining Time—This field is only displayed if the feature is currently activated. It
displays the remaining time during which the LED will flash.
• Unit ID—This field is only displayed when the device is in a stack. Specify the unit on
which the network port LEDs will flash or All for all units.
STEP 3 Click Start to activate the feature.
When the feature is activated the Start button is replaced by the Stop button, which allows you
to stop the LED blinking before the defined timer expires.
To Next Page
Loading...
