Cisco SF352-08MP - Page 740

Smart Network Application (SNA)
DAC Workflow
514 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
25
The report displays the following fields:
Field Value Comments
Device The device identifiers (Host name, IP
address)
Action Possible actions for DAC server:
• Enable RADIUS server
• Disable RADIUS server
• Update client list
• Create RADIUS server group
• Delete RADIUS server group
Possible actions for DAC client:
• Add RADIUS server connection
• Update RADIUS server connection
• Remove RADIUS server connection
• Update 802.1x settings
• Update interface authentication
settings
• Update interface host and session
settings
It is possible (and likely) for
multiple actions to appear for
each device.
Each action can have its own
status.
Warnings Possible warnings for DAC server include:
• Selected IP interface is dynamic.
Possible warnings for DAC clients include:
• Device is already a client of a
different RADIUS server.
• No ports are selected.
Warnings also contain links
to the sections of the DAC
where they can be addressed.
Changes can be applied when
warnings are present.
Status • Pending
• Success
• Failure
When the status is a failure,
the error message is shown
for the action.