Administration: Discovery
Configuring CDP
143 Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3
9
• LLDP Optional TLVs
-
Size (Bytes)
—Total LLDP MED optional TLVs packets byte size.
-
Status
—If the LLDP MED optional TLVs packets were sent, or if they were
overloaded.
• LLDP MED Inventory
-
Size (Bytes)
—Total LLDP MED inventory TLVs packets byte size.
-
Status
—If the LLDP MED inventory packets were sent, or if they were
overloaded.
• Total (By te s)—Total number of bytes of LLDP information in each packet
• Left to Send (Bytes)—Total number of available bytes left for additional
LLDP information in each packet.
Configuring CDP
This section describes how to configure CDP.
It covers the following topics:
• Setting CDP Properties
• Editing CDP Interface Settings
• Displaying CDP Local Information
• Displaying CDP Neighbors Information
• Viewing CDP Statistics
Setting CDP Properties
Similar to LLDP, CDP (Cisco Discovery Protocol) is a link layer protocol for directly
connected neighbors to advertise themselves and their capabilities to each other.
Unlike LLDP, CDP is a Cisco proprietary protocol.
To Next Page
Loading...
