2
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3 12
Status and Statistics
This section describes how to view device statistics.
It covers the following topics:
• Viewing Ethernet Interfaces
• Viewing Etherlike Statistics
• Viewing GVRP Statistics
• Viewing 802.1X EAP Statistics
• Viewing TCAM Utilization[
• Managing RMON
Viewing Ethernet Interfaces
The Interface page
displays traffic statistics per port. The refresh rate of the
information can be selected.
This page is useful for analyzing the amount of traffic that is both sent and
received and its dispersion (Unicast, Multicast, and Broadcast).
To display Ethernet statistics and/or set the refresh rate:
STEP 1 Click Status and Statistics > Interface.
STEP 2 Enter the parameters.
• Interface—Select the type of interface and specific interface for which
Ethernet statistics are to be displayed.
• Refresh Rate—Select the time period that passes before the interface
Ethernet statistics are refreshed. The available options are:
- No Refresh—Statistics are not refreshed.
To Next Page
Loading...
