Cisco SF500-24P

Security
Key Management
379 Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3
20
STEP 1 Click Security > Key Management > Key Settings.
STEP 2 To add a new key string, click Add.
STEP 3 Enter the following fields:
• Key Chain—Name for the key chain.
• Key Identifier—Integer identifier for the key chain.
• Key String—Value of the key chain string. Enter one of the following options:
- User Defined (Encrypted)—Enter an encrypted version.
- User Defined (Plaintext)—Enter a plaintext version.
NOTE Both the Accept Life Time and the Send LifeTime values can be
entered. The Accept Life Time indicates when the key-identifier for receiving
packets is valid. The Send Life Time indicates when the key-chain for
sending packets is valid. The fields are only described for the Accept Life
Time. The Send Life Time has the same fields.
• Accept Life Time—Specifies when packets with this key are accepted.
Select one of the following options.
- Always Valid—No limit to the life of the key-identifier.
- User Defined—Life of the key-chain is limited. If this option, is selected
enter values in the following fields.
• Start Date—Enter the earliest date that the key-identifier is valid.
• Start Time—Enter the earliest time that the key-identifier is valid on the Start
Date.
• End Time—Specifies the last date that the key-identifier is valid. Select one
of the following options.
- Infinite—No limit to the life of the key-identifier.
- Duration—Life of the key-identifier is limited. If this option, is selected
enter values in the following fields.
• Duration—Length of time that the key identifier is valid. Enter the following
fields:
- Days—Number of days that the key-identifier is valid.
- Hours—Number of hours that the key-identifier is valid.