Name: Cisco SG350-10SFP
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Status and Statistics

Port Utilization

52 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4

• Pause Frames Transmitted—Flow control pause frames transmitted from the selected

interface.

STEP 3 To view statistics counters in table view, click View All Interfaces Statistics to see all ports in

table view.

Port Utilization

The Port Utilization page displays utilization of broadband (both incoming and outgoing) per

port.

To display port utilization:

STEP 1 Click Status and Statistics > Port Utilization.

STEP 2 Enter the Refresh Rate, which is the time period that passes before the interface Ethernet

statistics are refreshed.

The following fields are displayed for each port:

• Interface—Name of port.

• Tx Utilization—Amount of bandwidth used by outgoing packets.

• Rx Utilization—Amount of bandwidth used by incoming packets.

To view a graph of historical utilization over time on the port, select a port and click View

Interface History Graph. In addition to the above, the following field is displayed:

• Time Span—Select a unit of time. The graph displays the port utilization over this unit

of time.

GVRP

The GVRP page displays information regarding GARP VLAN Registration Protocol (GVRP)

frames that sent or received from a port. GVRP is a standards-based Layer 2 network protocol,

for automatic configuration of VLAN information on switches. It is defined in the 802.1ak

amendment to 802.1Q-2005.

Questions and Answers:

Need help?

Do you have a question about the Cisco SG350-10SFP and is the answer not in the manual?

Cisco SG350-10SFP Specifications

General