VLAN Management
Customer Port Multicast TV VLAN
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 267
12
To map ports to Multicast TV VLANs:
STEP 1 Click VLAN Management > Customer Port Multicast TV VLAN > Port Multicast VLAN
Membership.
STEP 2 Select a VLAN from Multicast TV VLAN.
STEP 3 Select an interface from Interface Type.
STEP 4 The Candidate Customer Ports list contains all access ports configured on the device. Move
the required ports to the Member Customer Ports field.
STEP 5 Click Apply. The new settings are modified, and written to the Running Configuration file.
To Next Page
Loading...
