Security: 802.1X Authentication
Web Authentication Customization
374 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
18
• Password Textbox Label—Select the label to be displayed before the password
textbox.
• Language Selection—Select to enable the end user to select a language.
• Language Dropdown Label—Enter the label of the language selection dropdown.
• Login Button Label—Enter the label of the login button.
• Login Progress Label—Enter the text that will be displayed during the login process.
STEP 8 Click Apply and the settings are saved to the Running Configuration file.
STEP 9 Click Edit labeled 4. The following fields are displayed:
• Terms and Conditions—Select to enable a terms and conditions text box.
• Terms and Conditions Warning—Enter the text of the message to be displayed as
instructions to enter the terms and conditions.
• Terms and Conditions Content—Enter the text of the message to be displayed as
terms and conditions.
STEP 10 Click Apply and the settings are saved to the Running Configuration file.
STEP 11 Edit labeled 5. The following fields are displayed:
• Copyright—Select to enable displaying copyright text.
• Copyright Text—Enter the copyright text.
STEP 12 Click Apply and the settings are saved to the Running Configuration file.
STEP 13 Click Edit Success Page.
Figure 4 The following page is displayed
.
STEP 14 Click the Edit button on the right side of the page.
STEP 15 Enter the Success Message, which is the text that will be displayed if the end user successfully
logs in.
STEP 16 Click Apply and the settings are saved to the Running Configuration file.
To Next Page
Loading...
