EasyManuals Logo
Home>Cisco>Switch>SG550X-24MPP

Cisco SG550X-24MPP Administration Guide

Cisco SG550X-24MPP
762 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #390 background imageLoading...
Page #390 background image
IP Configuration
IPv4 Management and Interfaces
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 303
16
• Reason—
- No Problem
- No Resource
- No Snoop VLAN
- Trust Port
STEP 2 To add an entry, click Add.
STEP 3 Enter the fields:
• VLAN ID—VLAN on which packet is expected.
• MAC Address—MAC address of packet.
• IP Address—IP address of packet.
• Interface—Unit/Slot/Interface on which packet is expected.
• Type—The possible field values are:
- Dynamic—Entry has limited lease time.
- Static—Entry was statically configured.
• Lease Time—If the entry is dynamic, enter the amount of time that the entry is to be
active in the DHCP Database. If there is no Lease Time, check Infinite.)
STEP 4 Click Apply. The settings are defined, and the device is updated.
DHCP Server
This section covers the following topics:
•Overview
• Properties
•Network Pool
• Excluded Addresses
• Static Hosts
• DHCP Options

Table of Contents

Other manuals for Cisco SG550X-24MPP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SG550X-24MPP and is the answer not in the manual?

Cisco SG550X-24MPP Specifications

General IconGeneral
BrandCisco
ModelSG550X-24MPP
CategorySwitch
LanguageEnglish

Related product manuals