Administration: Discovery
Discover - LLDP
115 Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
8
STEP 5 Enter the values:
• Network Policy Number—Select the number of the policy to be created.
• Application—Select the type of application (type of traffic) for which the network
policy is being defined.
• VLAN ID—Enter the VLAN ID to which the traffic must be sent.
• VLAN Type—Select whether the traffic is Tagged or Untagged.
• User Priority—Select the traffic priority applied to traffic defined by this network
policy. This is the CoS value.
• DSCP Value—Select the DSCP value to associate with application data sent by
neighbors. This value informs them how they must mark the application traffic they
send to the device.
STEP 6 Click Apply. The network policy is defined.
NOTE You must manually configure the interfaces to include the desired manually-
defined network policies for the outgoing LLDP packets using the LLDP MED Port
Settings.
LLDP MED Port Settings
The LLDP MED Port Settings page enables the selection of the LLDP-MED TLVs and/or the
network policies to be included in the outgoing LLDP advertisement for the desired interfaces.
Network policies are configured using the LLDP MED Network Policy page.
NOTE If LLDP-MED Network Policy for Voice Application (LLDP MED Network Policy Page) is
Auto and Auto Voice VLAN is in operation, then the device automatically generates an LLDP-
MED Network Policy for Voice Application for all the ports that are LLDP-MED enabled and
are members of the voice VLAN.
To configure LLDP MED on each port:
STEP 1 Click Administration > Discovery - LLDP > LLDP MED Port Settings.
This page displays the following LLDP MED settings for all ports (only fields not described in
the Edit page are listed):
• User Defined Network Policy—Policies are defined for types of traffic (called
application). This is defined in the LLDP MED Network Policy. In this case, the
following information is displayed for the policy on the port:
To Next Page
Loading...
Need help?
General
