22
Chapter 3: Connecting the Switch
Configuring Units and Ports
Linksys One Ready Communications Solution
Chapter
3
Stack Management Page
The Stack Management Page contains the following fields:
• Master Election — Indicates the method of electing the Stack Master device. The possible
values are:
- Automatically — The master is selected automatically by software.
- Force Master — The unit is forced to be master of the stack. Note that only units
with the Unit ID of 1 or 2 can be the stack master.
• Stacking Ports After Reset — Allows the user to decide what cable type is in use. The
possible values are:
- Combo Ports — Indicates that the combo port is used as the stacking port.
- Copper Ports — Indicates that the copper port is used as the stacking port.
To Next Page
Loading...
