Cisco SGE2000 Administration Guide

i
Linksys One Ready Communications Solution
Contents
Chapter 1: Introduction - - - - - - - - - - - - - - - - - - - - - - - - -1
What’s in this User Guide? 1
Chapter 2: Getting to Know the Switch - - - - - - - - - - - - - - - - -3
Overview 3
The Front Panel 3
Front Panel LEDs 3
LAN Port LEDs 4
Uplink Port LEDs 4
Stack ID LEDs 4
Reset Switch 5
LAN Ports 5
Uplink Ports 6
The Back Panel 6
Power Port 6
Console Port 7
RPS Port 7
Chapter 3: Connecting the Switch - - - - - - - - - - - - - - - - - - - -8
Overview 8
Before You Install the Switch... 8
Placement Options 9
Desktop Placement 9
Rack-Mount Placement 9
Wall-Mount Placement 10
Connecting the Cables 11
Stacking Multiple Switches 12
Connecting Cabling for Stacking 13
Managing Stacks 14
Building Automatically-Configured Stacks 14
Building Manually-Configured Stacks 14
Understanding Stack Resiliency 15
Understanding Advanced Stacking 15

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg