Cisco SGE2000 Administration Guide

Appendix
E
63
Appendix E: Specifications
Linksys One Ready Communications Solution
DOS
prevention
DOS Attack prevention
Spanning
Tree
IEEE 802.1D Spanning Tree, IEEE 802.1w Rapid Spanning Tree, IEEE
802.1s Multiple Spanning Tree, Fast Linkover
IGMP
Snooping
IGMP (v1/v2) snooping limits bandwidth-intensive video traffic to only
the requestors. Support 256 multicast groups.
Power
Redundancy
Connection to RPSU for power redundancy
QoS • Priority levels - 4 Hardware queues
• Scheduling - Priority Queuing and Weighted Round Robin (WRR)
• Class of Service
- Port-based
- 802.1p VLAN priority based
- IPv4/v6 IP Precedence/TOS/DSCP based
- Diffserv
- Classification and Remarking ACLs
•Rate Limiting
- Ingress policer
- Egress rate control
Certifications UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47)
Class A
Regulatory
Compliance
Products with the CE Marking indicate compliance with the 89/336/EEC and
73/23/EEC directives, which include the safety and EMC standards listed below.
Safety UL 60950-1
IEC60950-1 CB / TUV/Rh
CSA-C22.2 No. 60950
EN 60950
AS/NZS 60950-1
C-Tick

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg