Cisco SLM224G4S - Network Settings

Getting Started
Setup
Cisco Small Business SLM Series Smart Switches Administration Guide 6
1
STEP 1 Click Setup > Network Settings. The Network Settings window appears:
Network Settings
The
Network Settings window contains the following fields:
• System Name — Defines the user-defined system name.
• System Location — Defines the user-defined system location, for example,
3rd floor.
• System Contact — Defines the user-defined system contact person.
• Base MAC Address — Displays the MAC address.
• Management VLAN — Selects the management VLAN. The default is 1.
• IP Address Mode — Retrieves the IP address mode using DHCP or Static.
The possible field values are:
- DHCP — Retrieves the IP addresses using DHCP.
- Static — The IP addresses are statically defined. If Static is selected the
IP Address, Subnet Mask, and Default Gateway fields are available.
• IP Address — Defines the system IP address.