Cisco SLM224G4S - IP Access List

Security
IP Access List
Cisco Small Business SLM Series Smart Switches Administration Guide 41
5
IP Access List
The IP Access window enables the user to allow management only from specified
IP addresses.
To open the
IP Access List window:
STEP 1 Click Security > IP Access List. The IP Access List window appears.
IP Access List
The
IP Access List window contains the following fields:
• IP Address — The IP address to be allowed.
• Wildcard Mask — Defines the address wildcard mask. Wildcard masks
specify which bits are used and which bits are ignored. A wildcard mask of
0.0.0.0 indicates that no bit is important. A wildcard of 255.255.255.255
indicates that all the bits are important. For example, if the source IP
address 149.36.184.198 and the wildcard mask is 255.0.0.0, the first eight
bits of the IP address are used, while the last eight bits are ignored.
STEP 2 Define the relevant fields.