Quality of Service
Basic Mode
Cisco Small Business SLM Series Smart Switches Administration Guide 52
6
• Queue — Defines the traffic forwarding queue to which the DSCP priority is
mapped. Four traffic priority queues are supported.
STEP 2 Define the relevant fields.
STEP 3 Click Save Settings. The settings are modified, and the device is updated.
Basic Mode
To open the
Basic Mode
window:
STEP 1 Click QoS > Basic Mode. The
Basic Mode
window appears.
Basic Mode
The
Basic Mode
window contains the following fields:
• Trust Mode — Displays the trust mode. The Trust Mode determines
whether the CoS (VLAN Priority Tagging) mapping or DSCP mapping
determine the packet queue. Possible values are:
To Next Page
Loading...
