Need help?Do you have a question about the Cisco SLM224G4S and is the answer not in the manual?
General| Number of Ports | 24 |
|---|---|
| Port Type | Gigabit Ethernet |
| Switching Capacity | 48 Gbps |
| Forwarding Rate | 35.7 Mpps |
| Jumbo Frame Support | Yes |
| Jumbo Frame Size | 9216 bytes |
| Power Supply | Internal |
| Product Type | Switch |
| Ports | 24 x 10/100/1000 Mbps |
| Layer | 2 |
| MAC Address Table Size | 8K |
| Management | Web-based, SNMP |
| Operating Temperature | 0 to 45°C (32 to 113°F) |
| Storage Temperature | -40 to 70 °C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Storage Humidity | 5% to 90% (non-condensing) |
Describes how to open the switch's user interface via a web browser and initial access.
Introduces configuration options including Summary, Network Settings, and Time.
Configures system name, location, contact, management VLAN, and IP addressing.
Details how to display speed, duplex mode, and flow control on specific ports.
Explains how to create Virtual LANs (VLANs) for network segmentation.
Covers port-based authentication using RADIUS and EAP for user access control.
Details limiting access on specific ports by MAC addresses for enhanced network security.
Configures Remote Authorization Dial-In User Service for centralized authentication.
Configures global QoS settings and defines Class of Service (CoS) priority.
Modifies user passwords for device access control.
Downloads firmware upgrade files from a TFTP server or computer.
Resets the device to factory default settings, erasing the configuration.
To Next Page
