Cisco SLM224G4S - Lacp

Port Management
LACP
Cisco Small Business SLM Series Smart Switches Administration Guide 22
2
LACP
Aggregate ports can be linked into link-aggregation port groups. Each group is
comprised of ports with the same speed, set to full-duplex operations.
Aggregated Links can be manually setup or automatically established by enabling
Link Aggregation Control Protocol (LACP) on the relevant links.
To open the
LACP window:
STEP 1 Click Port Management > LACP. The LACP window appears:
LACP
The
LACP window is divided into two configuration areas for configuring LACP
LAGs:
• Global Parameter
• Port Priority
The
LACP window also displays an LACP Port table.