Cisco SLM224G4S - Save Configuration

Admin
Save Configuration
Cisco Small Business SLM Series Smart Switches Administration Guide 75
9
• Ta r g e t P o r t — Defines the port to which traffic is mirrored. A single target
port can be specified. The fields to specify are as follows:
- Port — Indicates the port number being configured.
• Source Port — Defines the port from which traffic is mirrored. More than
one port can be defined. The fields to specify are as follows:
- Port — Indicates the port number being configured.
• Type — Indicates the port mode configuration for port mirroring. The
possible field values are:
- RxOnly — Defines the port mirroring on received packets only. This is
the default value.
- Tx On ly — Defines the port mirroring on transmitted packets only.
- Both — Defines the port mirroring on both received and transmitted
packets.
STEP 2 Define the relevant fields.
STEP 3 Click Save Settings. The settings are modified, and the device is updated.
Save Configuration
The Save Configuration window allows you to upload Switch configuration files to
a TFTP server, or to download saved Switch configuration files from a TFTP server
or from your computer via the HTTP interface.
To open the
Save Configuration window: