Cisco SLM224G4S - Page 80

Admin
Save Configuration
Cisco Small Business SLM Series Smart Switches Administration Guide 76
9
STEP 1 Click Admin > Save Configuration. The Save Configuration window appears.
Save Configuration
The
Save Configuration window section contains the following fields:
• via TFTP — Specifies that the configuration file is saved via a TFTP Server.
• via HTTP — Specifies that the configuration file is saved via a HTTP Server.
When
via TFTP is selected the following fields are displayed:
• Upgrade — Specifies that the source is a configuration file on the TFTP
server and the destination is the start up config on the device. This is an
upgrade procedure.
• Backup — Specifies that the source is the start up config on the device and
the destination is a configuration file on the TFTP server. This is a backup
procedure.
• File Type — Specifies the type of file being saved. Possible values are:
- Configuration — The configuration file that the device uses at startup.
• TFTP Server — Specifies the TFTP Server IP Address to which the
Configuration file is uploaded or from which it is downloaded.