Cisco SLM224G4S - 802.1 x Settings

Security
802.1x Settings
Cisco Small Business SLM Series Smart Switches Administration Guide 37
5
STEP 1 Click Security > 802.1x Settings. The 802.1x Settings window appears.
802.1x Settings
The
802.1x Settings window contains the following fields:
• Enable 802.1x — Enables or disables 802.1x on the device.
• Interface — Indicates the interface to configure the 802.1x settings.
- Port — Indicates port to configure.
• Status Port Control — Specifies the port authorization state. The possible
field values are as follows:
- ForceAuthorized — The controlled port state is set to ForceAuthorized
(forward traffic).
- ForceUnauthorized — The controlled port state is set to
ForceUnauthorized (discard traffic).
- Auto — The controlled port state is set by the system.
• Enable Periodic Reauthentication — Enables periodic reauthentication.