Quality of Service
CoS Settings
Cisco Small Business SLM Series Smart Switches Administration Guide 48
6
STEP 1 Click QoS > CoS Settings. The
CoS Settings
window appears.
CoS Settings
The
CoS
Settings
area contains the following fields:
• QoS Mode — Indicates if QoS is globally enabled on the device. The
possible values are:
-
Disable
— Disables QoS on the device.
-
Basic
— Enables QoS on the device.
• Class of Service — Specifies the CoS priority tag values, where zero is the
lowest and 7 is the highest.
• Queue — Defines the traffic forwarding queue to which the CoS priority is
mapped. Four traffic priority queues are supported.
• Restore Defaults — Restores the device factory defaults for mapping CoS
values to a forwarding queue.
The
CoS Default
area contains the following fields:
• Interface — Interface to which the CoS configuration applies.
To Next Page
Loading...
