Quality of Service
Queue Settings
Cisco Small Business SLM Series Smart Switches Administration Guide 50
6
STEP 1 Click QoS > Queue Settings. The
Queue Settings
window appears.
Queue Settings
The
Queue Setting
s window contains the following fields:
• Strict Priority — Indicates that traffic scheduling for the selected queue is
based strictly on the queue priority. Higher priority queues always receive
bandwidth before lower priority queues.
• WRR — Indicates that traffic scheduling for the selected queue is based
strictly on the WRR.
NOTE Note: WRR and Strict priority exclude each other and are system wide (to all ports).
• Queue — Displays the queue for which the queue settings are displayed.
The possible field range is 1 - 4.
• WRR Weight — Defines the WRR weights of the queues in GE devices. In FE
devices, the weights are displayed for reference only.
• % of WRR Bandwidth — Displays the amount of bandwidth assigned to the
queue. These values are fixed and are not user defined.
To Next Page
Loading...
