Admin
Defining Bonjour
Cisco Small Business SLM Series Smart Switches Administration Guide 86
9
STEP 1 Click System > Admin > Bonjour. The
Bonjour
window appears:
Bonjour
The
Bonjour
window
contains the following fields:
• Bonjour State — Enables Bonjour thereby allowing the Switch to publish
device services via Bonjour using the mDNS service. The possible field
values are:
-
Enable
— Enables Bonjour on the device. This is the default value.
-
Disable
— Disables Bonjour on the device.
• Service Type Selection — Defines the
DNS Service Discovery
(DNS-SD)
Service Type used to publish devices on the network. The possible field
values are:
-
_csbdp (default)
— Specifies the Service Type selected is _csbdp. This
is a Cisco generic Service Type. The port number is chosen randomly
from the port range of 4000-5000 at the initialization stage and is used
afterwards. This is the default value.
-
HTTP
— Specifies the Service Type selected is HTTP which is
published using the default http TCP port 80. HTTP is used mainly for
human-readable HTML content served over HTTP.
To Next Page
Loading...
