Cisco Small Business AP541N - Page 9

8 Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
STEP 8 Enter the login information:
Username = cisco
Default password = cisco (Passwords are case sensitive.)
The Getting Started window displays.
Next, we recommend that you:
• Change the password.
• Configure the SSID and enable wireless security.
• Enable the radio. (The radio is disabled by default to prevent
unauthorized users from accessing the network before you
have enabled wireless security on the Cisco AP541N.)
• Update the Cisco AP541N software with the latest version by
using the Software Upgrade link on the Getting Started page.
These tasks can be accomplished by using the procedures in the
Cisco Small Business AP541N Access Point Administration
Guide.
Default Wireless Network Parameters
The factory default parameters for the radio are:
CAUTION We recommend that you change the password on the access
point and enable security on the device and your wireless
network.
Parameter Default Value
data VLAN 1
voice VLAN 100
data SSID cisco–data (VLAN 1)
voice SSID cisco-voice (VLAN 100)
scanner SSID cisco-scan (VLAN 1) WPA Personal security
w/AES. The passphrase is intermec.
wireless security None (We strongly recommend that you set
wireless security.)