•
Effect of damage on the installation
Figure 4: Shipping Box Contents
Prepare for Server Installation
•
Installation Guidelines, on page 12
•
Rack Requirements, on page 13
•
Equipment Requirements, on page 13
•
Slide Rail Adjustment Range, on page 13
Installation Guidelines
Warning: To prevent the system from overheating, do not operate it in an area that exceeds the maximum
recommended ambient temperature of: 40° C (104° F).
Statement 1047
Warning: The plug-socket combination must be accessible at all times, because it serves as the main
disconnecting device.
Statement 1019
This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the
protective device is rated not greater than: 250 V, 15 A.
Statement 1005
Installation of the equipment must comply with local and national electrical codes.
Cisco Identity Services Engine Hardware Installation Guide, Release 2.0.1
12
Install Cisco ISE Software on the SNS 3515 and SNS 3595 Appliances
Prepare for Server Installation
To Next Page
Loading...
