Cisco SPA122 Provisioning Guide

Voice Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 145
6
<Bound_IPEI> Enter the device’s IPEI number (a unique hardware identifier
comparable to a MAC address) if you want to bind this device
to the specified handset ID, such as Handset 3. The IPEI can
be found in the Settings > Phone Info menu on the handset.
Default setting: blank

Cisco SPA122 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Mbps Ethernet
Voice Protocol	SIP
Voice Codecs	G.711, G.726, G.729 A
Security	TLS
Power Supply	5V DC, 2A
Network Ports	1 x 10/100 Mbps
Fax Support	T.38 fax relay
Operating Temperature	0°C to 45°C
Storage Temperature	14 to 140°F (-10 to 60°C)
Humidity	10% to 90% noncondensing
Weight	0.16 kg