Cisco SPA122 Provisioning Guide

Router Configuration Parameters
<WAN_Interface> WAN Interface Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 151
7
<WAN_Static_IP_NET> Description: Specifies the IPv4 address for the Static IP connection.
User Interface: Interface Setup > Basic Setup > Internet Settings
page, Internet IPv4 address text box (available when Static IP is the
Connection Type)
Parameters: Internet_IP:Subnet_Mask:Default_Gateway
[:DNS1[:DNS2[:DNS3]]]
Values:
Internet_IP: IPv4 address
Subnet_Mask: IPv4 mask address
Default_Gateway: IPv4 address
DNS_1: IPv4 address
DNS_2: IPv4 address
DNS_3: IPv4 address
Default: 0.0.0.0:0.0.0.0:0.0.0.0:0.0.0.0:0.0.0.0:0.0.0.0
Example:
<WAN_Static_IP_NET>
10.1.1.1:255.255.255.0:10.1.1.254:10.1.1.2:10.1.1.3</WAN_Static_
IP_NET>
<WAN_PPPoE_User_Name> Description: Username for PPTP session through the INTERNET
(WAN) port.
User Interface: Interface Setup > Basic Setup > Internet Settings
page, User Name field (available when PPPoE is the Connection
Typ e)
Values: (up to 64 characters), Printable ASCII characters
Default: null
Example:
<WAN_PPPoE_User_Name>test@example.net</WAN_PPPoE_User_Name>
Parameter Details

Cisco SPA122 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Mbps Ethernet
Voice Protocol	SIP
Voice Codecs	G.711, G.726, G.729 A
Security	TLS
Power Supply	5V DC, 2A
Network Ports	1 x 10/100 Mbps
Fax Support	T.38 fax relay
Operating Temperature	0°C to 45°C
Storage Temperature	14 to 140°F (-10 to 60°C)
Humidity	10% to 90% noncondensing
Weight	0.16 kg