Cisco SPA122 Provisioning Guide

Router Configuration Parameters
<WAN_Interface> WAN Interface Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 152
7
<WAN_PPPoE_Password> Description: Configures the interface settings for defined VLAN sub
interfaces. VLAN ID n must be previously defined in the VLAN_ID_
Index tag. This tag defines the password for PPPoE session
configured over the sub interface. Note: the value of this field is
hidden when reading the config.xml file from the device.
User Interface: Interface Setup > Basic Setup > Internet Settings
page, Password field (available when PPPoE is the Connection Type)
Values: password (up to 64 characters)
Default: commented out,
<!-- <WAN_PPPoE_Password></WAN_PPPoE_
Password>-->
Example:
<WAN_PPPoE_Password>my-password</WAN_PPPoE_Password>
<WAN_PPPoE_Service_Name> Description: Descriptive service name (provided by the ISP), for a
PPPoE session.
User Interface: Interface Setup > Basic Setup > Internet Settings
page, Service Name field (available when PPPoE is the Connection
Typ e)
Parameter: Service name
Values: name (up to 64 characters)
Default: null
Example:
<WAN_PPPoE_Service_Name>ServiceX_PPP</WAN_PPPoE_Service_Name>
Parameter Details

Cisco SPA122 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Mbps Ethernet
Voice Protocol	SIP
Voice Codecs	G.711, G.726, G.729 A
Security	TLS
Power Supply	5V DC, 2A
Network Ports	1 x 10/100 Mbps
Fax Support	T.38 fax relay
Operating Temperature	0°C to 45°C
Storage Temperature	14 to 140°F (-10 to 60°C)
Humidity	10% to 90% noncondensing
Weight	0.16 kg