Cisco SPA122 Provisioning Guide

Router Configuration Parameters
<SNMP> Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 171
7
<Get_Community> Description: A community string for authentication for SNMP GET
commands.
User Interface: Administration > Management > SNMP page,
SNMP section, Get/Trap Community field
Values: string
Default: public
Example:
<Get_Community>MyGet</Get_Community>
<Set_Community> Description: A community string for authentication for SNMP GET
commands.
User Interface: Administration > Management > SNMP page,
SNMP section, Set Community field
Values: string
Default: private
Example:
<Set_Community>MySet</Set_Community>
<SNMPV3> User Interface: Administration > Management > SNMP page,
SNMPV3 section, Enable and Disable fields
Values:
0: Disabled
1: Enabled
Default: 0
Example: SNMPv3 enabled
<SNMPV3>1</SNMPV3>
Parameter Details

Cisco SPA122 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Mbps Ethernet
Voice Protocol	SIP
Voice Codecs	G.711, G.726, G.729 A
Security	TLS
Power Supply	5V DC, 2A
Network Ports	1 x 10/100 Mbps
Fax Support	T.38 fax relay
Operating Temperature	0°C to 45°C
Storage Temperature	14 to 140°F (-10 to 60°C)
Humidity	10% to 90% noncondensing
Weight	0.16 kg