Cisco SPA122 - Page 172

Router Configuration Parameters
<SNMP> Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 172
7
<RW_User> Description: A username for SNMP authentication
User Interface: Administration > Management > SNMP page,
SNMPV3 section, R/W User field
Values: username
Default: v3rwuser
Example:
<RW_User>MyUsername</RW_User>
<Auth_Protocol> Description: SNMPv3 authentication protocol
User Interface: Administration > Management > SNMP page,
SNMPV3 section, Auth-Protocol field
Values:
MD5
SHA
Default: MD5
Example: SHA enabled
<Auth_Protocol>SHA</Auth_Protocol>
<Auth_Password> Description: Password for SNMPv3 authentication
User Interface: Administration > Management > SNMP page, Auth-
Password field for SNMPv3
Values: string
Default: 1111111111
Example:
<Auth_Password>MyPassword</Auth_Password>
Parameter Details