Cisco SPA504 Setup & User Guide

6
© 2001 – 20010 Saco Technology
Using the Call Features of the Cisco SPA504G
Placing a Call
There are 2 options available to place a call:
 Lift the handset and dial the
number. (This method will
take 5 seconds before it
makes the call)
 Dial the number and press
the ―dial‖ soft key.
Answering a Call
There are 2 options available to
answer a call.
 Lift the handset.
 Press the ―Speakerphone‖ key.
Ending a Call
 Hang up the Handset.
Placing a Call on Hold
While on the call:
Press the ―hold‖ button
To return to the call, press the ―hold‖ button again.

Cisco SPA504 Specifications

General

Lines Supported	4
Network Protocols	SIP, SPCP
Display	128 x 64 monochrome LCD
Ethernet Ports	2 (10/100 Mbps)
Power over Ethernet	Yes
Audio Codecs	G.711, G.729a, G.722
Speakerphone	Yes
Headset Port	Yes, 2.5 mm