Need help?Do you have a question about the Cisco SRW224P and is the answer not in the manual?
General| PoE Ports | 24 |
|---|---|
| Switching Capacity | 8.8 Gbps |
| Forwarding Rate | 6.5 Mpps |
| MAC Address Table Size | 8K entries |
| Jumbo Frame Support | Up to 9216 bytes |
| Power Supply | Internal |
| VLAN Support | Up to 256 VLANs |
| QoS | 4 Queues per port |
| Security Features | Port Security, MAC Filtering |
| Management | Web-based, SNMP |
| Ports | 24 10/100Base-TX ports 2 10/100/1000Base-T ports |
| Dimensions | 17.32 x 10.12 x 1.73 in |
Introduces the switch and outlines the user guide's structure and content.
Describes the front panel LEDs (System, Link/Act, PoE, Speed) and their functions.
Details ports on the back panel (LAN, Gigabit, Console) and the side panel security slot.
Explains RJ-45, Gigabit Expansion, and Console port functionalities and connections.
Shows a typical network configuration and maximum cabling distances for setup.
Covers preparation, Fast Ethernet considerations, and guidelines for switch placement.
Provides instructions for physical installation, desktop/rack mounting, and power connection.
Guides on configuring HyperTerminal and accessing the switch via the console port.
Explains the login process and how to navigate through the console interface menus.
Details system, IP, file management, and reboot settings accessible via the console.
Covers configuring port status, speed, duplex, flow control, and Power over Ethernet settings.
Details accessing the web interface, login, and the main tabs available for configuration.
Explains how to view system details, configure system mode, and manage the forwarding database.
Covers setting up IP addresses, subnet masks, default gateways, and network parameters.
Guides on configuring ports, VLANs, Link Aggregation Groups (LAGs), and LACP.
Details QoS settings like Class of Service, queue management, IP precedence, and rate limiting.
Covers DiffServ policies, Access Control Lists (ACLs), 802.1x, port security, and system passwords.
Explains SNMP, IGMP configuration, and system maintenance tasks like reset and file transfer.
Explains Fast and Gigabit Ethernet technologies and different cabling types.
Provides definitions of networking terms and the switch's technical specifications.
Outlines the product's limited warranty and regulatory compliance information.
Details crucial safety information, warnings for fiber optics, and installation guidelines.
Lists contact methods for Linksys support and obtaining product information.
To Next Page
