Installation and upgrade of Cisco TMS
Cisco TelePresence Management Suite Installation and Getting Started Guide Page 25 of 70
Figure 13 Database collation.
7. The Release and option keys page is displayed if you are upgrading, the existing keys are shown.
Enter the key(s) to enable additional systems or additional feature support such as Network
Integration or other external integration packages. A new release key is also required when
upgrading to a new major release. The release key must be entered before adding option keys. To
add an option key, click Add Option and enter the key. Keys are validated before being added.
(Option keys can also be added post-installation go to Administrative Tools.) Click Next.
For questions regarding your release or option keys, contact your reseller or Cisco TelePresence
Support.
Figure 14 Release and option keys.
If no release key is entered, Cisco TMS installs an evaluation version of Cisco TMS which
includes support for 3 systems for Cisco TMS and Cisco TMS Scheduler.
Your release key must be entered before you add Option keys. Click Add Option and enter the
key. Keys are validated before being added to the list.
You can now pre-configure some default settings to allow Cisco TMS to immediately start working
with a basic network configuration (these settings can be amended after installation). If configured
properly, Cisco TMS can automatically discover, monitor, log, provide phone books, and schedule
a basic existing H.323/SIP network.
To Next Page
Loading...
Need help?
General