Cisco TelePresence MX800 Single - Step 2: Remove Loudspeaker

D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
14
Cisco TelePresence MX800 Single Replacement Guide
Replace the single camera module (page 2 of 6)
Step 2: Remove loudspeakers from positions 3, 4 and 5
The illustrations show the loudspeaker in position 3.
Repeat the steps for the loudspeakers in positions 4 and 5.
When reconnecting the loudspeakers, make sure to
connect the correct cable. The cables are marked with the
loudspeaker’s position (see illustration).
Loudspeaker
positions
Pull loudspeaker 10-15 cm (4-6 inch) out. Unplug the cable from the connector
on the back of the loudspeaker.
3
4
5
Remove screw.
PT4x10, Torx T20
2a 2b 2c