Cisco TelePresence MX800 Single - Replace the Monitor (Mounted on a Stand)

D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
33
Cisco TelePresence MX800 Single Replacement Guide
(page 1 of 5)Replace the monitor (mounted on a stand)
Step 1: Remove speaker grille, lower grille, loudspeakers and camera
Follow the steps described in “Replace the single camera module” on page 13 to
page 18; or “Replace the dual camera module” on page 19 to page 25.
Note that all loudspeakers have to be removed.
Step 2: Remove codec
Follow the steps described in “Replace the codec” on page 27 to page 30.
Step 3: Remove PoE injector
Follow the steps described in “Replace the PoE injector” on page 31 to page 32.
Spare parts:
• CTS-MX800-MON-S-S= (for single camera version)
• CTS-MX800-MON-S-D= (for dual camera version)
90 kg / 200 lb
4
The monitor is heavy. We recommend
four people working together to replace
the monitor.