Cisco TelePresence MX800 Single - Re-Assembly

D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
25
Cisco TelePresence MX800 Single Replacement Guide
Replace the dual camera module (page 7 of 7)
Step 7: Pull out camera module
Gently pull out the camera module.
Do not touch the lens.
Do not apply stress or strain to the
camera module.
Re-assembly:
In order to install the new camera module, follow all the
steps in reversed order.