Cisco TelePresence MX800 Single - Part Numbers for Spare Parts

D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
45
Cisco TelePresence MX800 Single Replacement Guide
Part numbers for spare parts
Part number Part description
CTS-MX800-S-FSK= Floor stand kit (all stand parts for both free standing
and wall secured options are included)
CTS-MX-FSK-SKI= Feet for free standing floor stand. This is only the feet;
it is not the complete frame. The feet are also included
in the floor stand kit (CTS-MX800-S-FSK=)
CTS-MX800-S-WMK= Wall mount kit
CTS-MXCAM-S= Single camera
CTS-MXCAM-D= Dual camera assembly
CTS-MXCODEC= Codec
CTS-MX700800-SPKR= One loudspeaker (fits in all positions)
CTS-PWR-AIR-INJ5= Power over Ethernet (PoE) injector (without cables)
CTS-MX800-MON-S-S= Monitor for single camera system (without camera,
codec, loudspeakers, PoE injector, covers, grilles and
cables)
CTS-MX800-MON-S-D= Monitor for dual camera system (without camera,
codec, loudspeakers, PoE injector, covers, grilles and
cables)
CT S-M X80 0 -S S C-TGR= Speaker grille for single camera systems
CT S-M X80 0 -S D C-TG R= Speaker grille for dual camera systems
CTS-MX800-S-LGR= Lower grille for systems mounted on a stand (for both
free standing and secured to the wall)
CTS-MX800-SWM-LGR= Lower grille for wall mounted systems
CTS-MX800-MON-SCV= Left and right side covers
For a complete overview of spare parts and cables for MX800 Single,
refer to the Spare parts overview that is available on our web site. Go to
http://www.cisco.com/go/mx-docs and select Maintain and Operate Guides.