D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
34
Cisco TelePresence MX800 Single Replacement Guide
Replace the monitor (mounted on a stand) (page 2 of 5)
Step 4: Remove all cables
All cables that were shipped with the system
remain in your property and should not be
returned to the supplier.
You will not receive new cables with the
replacement part.
For reconnecting the cables, refer to cabling details
in the Cable schema and Spare part list on our web
site. Go to http://www.cisco.com/go/mx-docs and
select Maintain and Operate Guides.
Power
From codec connector panel
From PoE injector
From codec, camera and
speakers to monitor
To Next Page
Loading...
