D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
28
Cisco TelePresence MX800 Single Replacement Guide
Replace the codec (page 2 of 4)
Step 2: Disconnect all cables from codec
Make sure to remember the position of the cables.
For reconnecting the cables, refer to cabling details
in the Cable schema and Spare part list on our web
site. Go to http://www.cisco.com/go/mx-docs and
select Maintain and Operate Guides.
To Next Page
Loading...
