D15298.01 MX800 Single Replacement Guide, MARCH 2015. www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
42
Cisco TelePresence MX800 Single Replacement Guide
Replace the monitor (wall mounted) (page 5 of 6)
Step 7: Lift off the monitor
Use lifting handles
To avoid trapping your fingers, use the lifting
handles at the bottom of the monitor.
The monitor is heavy
We recommend four people
working together to replace the
monitor. Two people should lift
the monitor using the handles as
described below; the other people
must help stabilizing the monitor.
Before moving the monitor
Plan ahead where to put down the
monitor. Ideally, place it in the original
shipping packaging.
Rear view
Rear view
Loosen the wing nuts on
both sides.
They are accessed from
the sides of the monitor.
Lift up the monitor and
place it in the original
shipping packaging.
7a
7b
90 kg / 200 lb
4
To Next Page
Loading...
