Cisco TelePresence SX20 Codec User Manual

D14949.13 SX20 Codec API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 121
Cisco TelePresence SX20 Codec API Reference Guide
xCommand SystemUnit MenuPassword Set
Set a menu password to restrict access to Administrator Settings menu. If you have a remote
control the password can also be set from the on screen menu. If you have a Cisco TelePresence
Touch controller the menu password is set from the command line interface.
Requires user role: ADMIN
Parameters:
Password(r): <S: 0, 255>
Example:
xCommand SystemUnit MenuPassword Set Password:***********
xCommand SystemUnit MenuPassword Validate
Validate that the supplied password is correct.
Requires user role: ADMIN
Parameters:
Password(r): <S: 0, 255>
Example:
xCommand SystemUnit MenuPassword Validate Password:***********
xCommand SystemUnit Notifications RemoveAll
Clears the list of system notifications that are reported by xStatus SystemUnit Notifications Text/
Type.
Requires user role: ADMIN
Example:
xCommand SystemUnit Notifications RemoveAll
xCommand SystemUnit OptionKey Add
Add an option key to support additional features.
Requires user role: ADMIN
Parameters:
Key(r): <S: 16, 24>
Example:
xCommand SystemUnit OptionKey Add Key:******************
xCommand SystemUnit OptionKey List
List all option keys that have been added to the system. Added in TC7.3.3.
Requires user role: ADMIN
Example:
xCommand SystemUnit OptionKey List
xCommand SystemUnit OptionKey Remove
Remove an individual Option key. Added in TC7.3.3.
Requires user role: ADMIN
Parameters:
Type(r): <DualDisplay/MultiSite/NaturalPresenter/PremiumResolution/RemoteMonitoring>
Example:
xCommand SystemUnit OptionKey Remove Type: PremiumResolution
xCommand SystemUnit OptionKey RemoveAll
Remove all Option keys.
Requires user role: ADMIN
Parameters:
Confirm(r): <Yes>
Example:
xCommand SystemUnit OptionKey RemoveAll Confirm: Yes
xCommand SystemUnit ReleaseKey Add
Add the software release key. Used to enable new software (applicable for main software releases).
Requires user role: ADMIN
Parameters:
Key(r): <S: 16, 24>
Example:
xCommand SystemUnit ReleaseKey Add Key:******************
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand

Cisco TelePresence SX20 Codec Specifications

General

Brand	Cisco
Model	TelePresence SX20 Codec
Category	Conference System
Language	English