Cisco TelePresence SX20 Codec User Manual

D14949.13 SX20 Codec API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 14
Cisco TelePresence SX20 Codec API Reference Guide
xCommand ??
xCommand Audio Microphones Mute
xCommand Audio Microphones Unmute
xCommand Audio Sound Play
Loop: <On/Off>
Sound(r): <Bump/Busy/CallDisconnect/CallInitiate/CallWaiting/Dial/KeyInput/KeyInputDelete/KeyTone/Nav/
NavBack/Notification/OK/PresentationConnect/Ringing/SpecialInfo/TelephoneCall/VideoCall/VolumeAdjust>
.
.
.
xCommand Video PreviewFilmstrip Set
Position(r): <LowerCenter/LowerLeft/LowerRight/UpperCenter/UpperLeft/UpperRight>
xCommand Video Selfview Set
FullscreenMode: <On/Off>
Mode: <On/Off>
OnMonitorRole: <First/Fourth/Second/Third>
PIPPosition: <CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/UpperRight>
OK
xCommand ?
- User Commands -
Audio Conference Logging Standby
Bookings Dial Message SystemUnit
Boot DTMFSend Peripherals UserInterface
Call Experimental Phonebook UserManagement
CallHistory FacilityService Presentation Video
CallLog FarEndControl Preset
CamCtrlPip HttpFeedback Provisioning
Camera Key Security
OK
Commands
Commands instruct the codec to execute actions, such as
to dial a number or to search the phone book. All commands
start with the prefix xCommand followed by a command path.
Writing xCommand ? on the command line will list all the top
level commands.
To view the complete list of commands and their parameters,
write xCommand ?? on the command line.
Command arguments are key-value pairs. The (r) behind the
argument name indicates that the argument is required for
the command.
When issuing a xCommand, the command consists of one
argument and one required parameter:
Example: xCommand Dial Number: 123
• xCommand is the command prefix. The command to be
executed is Dial.
• The example contains one argument, Number: 123.
Number is the key and 123 is its value. The key/value pair
is separated with ‘:’.
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
About the API

Cisco TelePresence SX20 Codec Specifications

General

Brand	Cisco
Model	TelePresence SX20 Codec
Category	Conference System
Language	English