Cisco TelePresence SX20 Codec User Manual

D14949.13 SX20 Codec API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 202
Cisco TelePresence SX20 Codec API Reference Guide
xStatus Video Input HDMI [n] SourceId
Shows the identifier of the input source that the connector is associated with.
Value space of the result returned:
<Integer>
xStatus Video Input HDMI [n] Type
Shows the connector type.
Value space of the result returned:
<Camera/Composite/DVI/HD-SDI/HDMI/USB/Unknown/VGA/YC/YPbPr>
xStatus Video Input DVI [n] SourceId
Shows the identifier of the input source that the connector is associated with.
Value space of the result returned:
<Integer>
xStatus Video Input DVI [n] Type
Shows the connector type.
Value space of the result returned:
<Camera/Composite/DVI/HD-SDI/HDMI/USB/Unknown/VGA/YC/YPbPr>
xStatus Video Input USB [n] SourceId
Shows the identifier of the input source that the connector is associated with.
Value space of the result returned:
<Integer>
xStatus Video Input USB [n] Type
Shows the connector type.
Value space of the result returned:
<Camera/Composite/DVI/HD-SDI/HDMI/USB/Unknown/VGA/YC/YPbPr>
xStatus Video Output
Shows the top level overview of the video output status.
xStatus Video Output HDMI [n] MonitorRole
Describes which video stream is shown on the monitor connected to the video output HDMI
connector.
First/Second/Third/Fourth: The role of the monitor in a multi-monitor setup. In a singlemonitor setup,
there is no difference between First, Second, Third and Fourth.
PresentationOnly: Shows presentation video stream if active.
Recorder: Shows all participants, including the local main video. If active, shows also the
presentation.
InternalSetup: Determined by the system, when xConfiguration Video Output HDMI [n] MonitorRole
is set to Auto.
Value space of the result returned:
<First/ Second/ Third/ Fourth/ PresentationOnly/ Recorder/ InternalSetup>
Example:
xStatus Video Output HDMI 1 MonitorRole
*s Video Output HDMI 1 MonitorRole: First
** end
xStatus Video Output HDMI [1, 2] Resolution Height
Shows the resolution height (in pixels) for the video output HDMI.
Value space of the result returned:
<120..3000>
Example:
xStatus Video Output HDMI 1 Resolution Height
*s Video Output HDMI 1 Resolution Height: 720
** end
xStatus Video Output HDMI [1, 2] Resolution Width
Shows the resolution width (in pixels) for the video output HDMI.
Value space of the result returned:
<176..4000>
Example:
xStatus Video Output HDMI 1 Resolution Width
*s Video Output HDMI 1 Resolution Width: 1280
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence SX20 Codec Specifications

General

Brand	Cisco
Model	TelePresence SX20 Codec
Category	Conference System
Language	English