Cisco TelePresence SX20 Codec User Manual

D14949.13 SX20 Codec API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 66
Cisco TelePresence SX20 Codec API Reference Guide
xConfiguration Standby StandbyAction
Define the camera position when going into standby mode.
Requires user role: ADMIN
Value space: <None/PrivacyPosition>
None: No action.
PrivacyPosition: Turns the camera to a sideways position for privacy.
Example:
xConfiguration Standby StandbyAction: PrivacyPosition
xConfiguration Standby WakeupAction
Define the camera position when leaving standby mode.
Requires user role: ADMIN
Value space: <None/Preset1/Preset2/Preset3/Preset4/Preset5/Preset6/Preset7/Preset8/
Preset9/Preset10/Preset11/Preset12/Preset13/Preset14/Preset15/RestoreCameraPosition/
DefaultCameraPosition>
None: No action.
Preset1 to Preset15: When leaving standby the camera position will be set to the position defined
by the selected preset.
RestoreCameraPosition: When leaving standby the camera position will be set to the position it
had before entering standby.
DefaultCameraPosition: When leaving standby the camera position will be set to the factory default
position.
Example:
xConfiguration Standby WakeupAction: RestoreCameraPosition
SystemUnit configuration
xConfiguration SystemUnit Name
Define the system name. The system name will be sent as the hostname in a DHCP request and
when the codec is acting as an SNMP Agent.Define the system name. The system name will be
sent as the hostname in a DHCP request and when the codec is acting as an SNMP Agent.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example:
xConfiguration SystemUnit Name: "Meeting Room"
xConfiguration SystemUnit MenuLanguage
Select the language to be used in the menus on screen, or on the Touch controller. All languages
are not supported on both user interfaces. The default language is English.
Requires user role: USER
Value space: <English/ChineseSimplified/ChineseTraditional/Catalan/Czech/Danish/Dutch/Finnish/
French/German/Hungarian/Italian/Japanese/Korean/Norwegian/Polish/PortugueseBrazilian/Russian/
Spanish/Swedish/Turkish/Arabic/Hebrew>
Example:
xConfiguration SystemUnit MenuLanguage: English
xConfiguration SystemUnit CallLogging Mode
Set the call logging mode for calls that are received or placed by the system. The call logs may then
be viewed via the web interface or using the xCommand CallHistory Get command.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable logging.
On: Enable logging.
Example:
xConfiguration SystemUnit CallLogging Mode: On
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration

Cisco TelePresence SX20 Codec Specifications

General

Brand	Cisco
Model	TelePresence SX20 Codec
Category	Conference System
Language	English