Cisco TelePresence SX20 Codec User Manual

D14949.13 SX20 Codec API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 89
Cisco TelePresence SX20 Codec API Reference Guide
xCommand Audio Volume Increase
Increase the volume on the endpoint.
Requires user role: USER
Parameters:
Steps: <1..10>
Example:
xCommand Audio Volume Increase Steps:3
xCommand Audio Volume Mute
Mute the volume on the endpoint.
Requires user role: USER
Example:
xCommand Audio Volume Mute
xCommand Audio Volume Set
Set the volume on the endpoint to a specified level.
Requires user role: USER
Parameters:
Lev e l(r): <1..100>
Example:
xCommand Audio Volume Set Level:30
xCommand Audio Volume SetToDefault
Set the current volume level as the default for the endpoint.
Requires user role: USER
Example:
xCommand Audio Volume SetToDefault
xCommand Audio Volume UnMute
Unmute the volume on the endpoint.
Requires user role: USER
Example:
xCommand Audio Volume SetToDefault
xCommand Audio VUMeter Start
Start collecting VU meter information for connector given by type and ID.
Requires user role: USER
Parameters:
ConnectorType(r): <HDMI/Line/Microphone>
ConnectorId(r): <1..4>
Example:
xCommand Audio VUMeter Start ConnectorType: Microphone ConnectorId: 1
xCommand Audio VUMeter Stop
Stop collecting VU meter information for connector given by type and ID.
Requires user role: USER
Parameters:
ConnectorType(r): <HDMI/Line/Microphone>
ConnectorId(r): <1..4>
Example:
xCommand Audio VUMeter Stop ConnectorType: Microphone ConnectorId: 1
xCommand Audio VUMeter StopAll
Stop collecting VU meter information for all connectors.
Requires user role: USER
Example:
xCommand Audio VUMeter StopAll
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand

Cisco TelePresence SX20 Codec Specifications

General

Brand	Cisco
Model	TelePresence SX20 Codec
Category	Conference System
Language	English