Cisco TelePresence System EX90 - Receiving Calls; Do Not Disturb; Far End Camera Control; Receiving Another Call While Already in a Call

www.cisco.com
Calling another (optional feature) Calling another (optional feature)
Receiving calls Receiving another call while already in a call
Tap Accept to accept the
incoming call or Reject to
reject it.
If you already are in a call and someone
else calls you will get the following
options:
• Accept the incoming call and join it
with the current call.
• Accept the incoming call and put the
current call on hold.
• Accept the incoming call and
disconnect the current call.
• Reject the incoming call and continue
with the current call.
(Optional feature)
If the other end point permits it, you may control
their camera. This is known as Far end camera
control. Tap Camera.
Pan and zoom the far end camera as needed. If
the other camera cannot be controlled, nothing
happens. Press Exit when finished.
Far end camera control
Do not disturb
The Do not disturb feature can be activated to
disable the incoming call alert signal. You may still
receive and place calls. Tap to activate—the icon will
then turn red and white. Tap again to deactivate.
21
Cisco TelePresence System EX90 User guide
D14724.03 User guide EX90, November 2010.
All contents are Copyright © 2010 Cisco Systems, Inc. All rights reserved.