Cisco TelePresence System EX90 - Entering the Settings Menus

www.cisco.com
Entering the Settings menus
Tap Setup.
Tap Settings
to gain access to the Settings.
Select the tab required by tapping on it.
Tap a field to enter
the corresponding
settings.
If both DVI and HDMI are connected to
external sources, a Source button will appear
in addition, letting you select which source to
display.
24
Cisco TelePresence System EX90 User guide
D14724.03 User guide EX90, November 2010.
All contents are Copyright © 2010 Cisco Systems, Inc. All rights reserved.