www.cisco.com
SIP settings
The SIP settings let you specify:
• Your URI.
• The Default transport layer, this can be set to TCP, UDP,
TLS or Auto.
• The proxy type can be set to Standard, Alcatel, Avaya,
TANDBERG, Microsoft, Nortel, Experimental, Siemens.
The experimental setting is for testing purposes.
• Outbound is not used in this version.
• Proxy discovery can automatic or manual. In the case of
manual the proxy address must be specified by you.
• Login name and password is required by the VCS.
Be sure to:
• Tap Save to put settings into effect.
nora.dollhouse@supplier.com
32
Cisco TelePresence System EX90 User guide
D14724.03 User guide EX90, November 2010.
All contents are Copyright © 2010 Cisco Systems, Inc. All rights reserved.
To Next Page
Loading...
