www.cisco.com
H.323 settings
The H.323 settings let you specify:
• An H.323 alias.
• Your H.323 id.
• Gatekeeper discovery (Manual or Automatic).
• The Gatekeeper address must be specified by you if
discovery has been set to manual.
• Authentication mode On or Off. If set to On, the EX90 will
send Login name and password to the Gatekeeper for
authentication.
In addition there are:
• Two fields to enter Login name and password. The
alphanumeric keyboard will appear whenever needed.
Be sure to:
• Tap Save to put changes into effect.
nora.dollhouse@supplier.com
31
Cisco TelePresence System EX90 User guide
D14724.03 User guide EX90, November 2010.
All contents are Copyright © 2010 Cisco Systems, Inc. All rights reserved.
To Next Page
Loading...
